INSTRUCTION MANUAL
CONNECTED NAVIGATION SYSTEM
When you fail to operate the unit correctly, the cause of the failure appears as the message on the screen.
Error Message |
Cause |
Solution |
Protect |
Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. |
Wire or insulate the speaker cord as appropriate and then press the <Reset> button (Click here). |
Hot Error |
When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit. |
Use the unit again after reducing the temperature of the unit. |
Mecha Error |
The disc player is malfunctioning. |
Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. |
Disc Error |
An unplayable disc is inserted. |
Change the disc. |
Read Error |
The disc is quite dirty. |
Clean the disc. |
Disc is upside down. |
Load the disc with the labeled side up. |
|
Region Code Error |
The disc you wanted to play has a region code that cannot be played with this unit. |
See Region Codes in the World or try another disc. |
Parental Level Error |
The disc you wanted to play has a higher level than the parental level you set. |
Set the parental level. |
Error 07–67 |
The unit is not operating correctly due to some reason or other. |
Push the unit’s Reset button. If the “Error 07−67” message does not disappear, see your nearest Kenwood dealer. |
No Device (USB device) |
The USB device is selected as a source although no USB device is connected. |
Change the source to any source other than USB/iPod. Connect a USB device, and change the source to USB again. |
Disconnected (iPod, Bluetooth audio player) |
The iPod/Bluetooth audio player is selected as a source although no iPod/Bluetooth audio player is connected. |
Change the source to any source other than iPod/Bluetooth. Connect an iPod/Bluetooth audio player, and change the source to iPod/Bluetooth again. |
No Media file |
The connected USB device contains no playable audio file. Media was played that doesn’t have data recorded that the unit can play. |
See Playable Media and Files and try another USB device. |
USB Device Error!! |
The connected USB device is rated a current capacity higher than the allowable limit. |
Check the USB device. Some trouble may have occurred to the connected USB device. |
Change the source to any source other than USB. Remove the USB device. |
||
Authorization Error |
Connection to the iPod has failed. |
|
Update your iPod |
The iPod’s software is an older version which the unit can not support. |
The unit may not support the connected iPod model. Confirm that the software for the iPod is the latest version. |
Navigation Error. Please turn on power again later. |
The communication error has occurred due to severely cold temperature. |
Turn on power again after warming your car interior. |
Network is disconnected |
Not connected to Wi-Fi. |
Connect to Wi-Fi. |
Account Error |
Logged in using Guest or Administrator account. |
To link to the Route Collector site, log in using Owner or User account and then use the Storage application. |
Your Dropbox and Kenwood accounts are not linked. |
Dropbox account information is not registered to the logged in Owner or User account. |
Log in Route Collector site and register the Dropbox account |
Error Message |
Cause |
Solution |
Check Tuner |
A SiriusXM tuner is not connected to this navigation system. |
Check the connection to the SiriusXM tuner. |
Subscription Updated - Press Return To Continue |
The SiriusXM subscription has been renewed. |
Touch [ 6 ] to clear the error message. |
Channel Not Available |
The currently selected channel is unavailable. |
— |
Ch Unsubscribed |
The currently selected channel is not subscribed to. |
— |
Check Antenna |
No antenna is connected to the SiriusXM tuner. |
Check that an antenna is connected to the SiriusXM tuner. |
No Signal |
No SiriusXM radio signal is received. |
— |