17.3 Display Setup
- Touch [ ] on any screen.
- Touch [SETUP].
SETUP Menu screen appears.
- Touch [Display].
Display screen appears.
See the following section for each setting.
Monitor angle control (DNN990HD)
You can adjust the angle of the monitor.
- Touch [Angle] in the Display Menu screen.
Angle setup screen appears.
- Select a number below an angle that will best suit your monitor viewing.
Default is “0”.
NOTE
- You can store the current monitor angle as the angle during power off. Touch [Memory] when the desired angle is selected.
|
Panel color coordinate
You can set the button illumination color.
The selectable items differ depending on the unit.
- Touch [Color] in the Display Menu screen.
Color screen appears.
- Touch [SET] of [Panel Color Coordinate].
Panel Color Coordinate screen appears.
NOTE
- You can touch [SET] or [Initialize] when [Panel Color Scan] is set to off.
- Touch [Initialize] to reset the settings to the default settings.
|
- Touch the desired color.
Registering original color
You can register your original color.
- Touch [Adjust] in the Panel Color Coordinate screen.
Panel Color RGB Coordinate screen appears.
- Use [C] and [D] to adjust each color value.
- Touch the desired preset key for 2 seconds.
Panel color scan
You can set the panel color to continuously scan through the color spectrum.
- Touch [ON] of [Panel Color Scan] in the Color screen.
Panel Color Scan is set to on.