DNN990HD/DNN770HD>7. DVD/Video CD (VCD) Operation>7.1 DVD/VCD Basic Operation

7.1 DVD/VCD Basic Operation

Most functions can be controlled from the source control screen and playback screen.

NOTE

  • Set the remote controller mode switch to DVD mode before starting operation, see Switching the operation mode.
  • The screen shot below is for DVD. It may be different from the one for VCD.

Control screen

DVD-1-1.png

Video screen

10DNX9_050000_Video.png

1 Information display

Displays the following information.

  • Title #, Chap #: DVD title and chapter number display
  • Track #/Scene #: VCD track or scene number display
    *Scene # is displayed only when PBC is on.
  • D, B, F, I, etc.: Current play mode display
    The meanings of each icon are as follows; D (play), B (fast forward), A (fast backward), F (search up), E (search down), I (stop), IR (resume stop), H (pause), ½ (slow playback), ¼ (slow reverse playback).

Touch this area to display the disc lable name.

2 Multi function key

Touch to switch the multi function menu. For details on the menu, see Multi function menu.

3 Multi function menu

Various functions can be operated using keys in this menu. For details on the keys, see Multi function menu.

4 Control switching key

Unavailable in DVD/VCD source.

5 Sub function menu

The following functions can be performed by using keys in this area.

  • Repeats the current content: Touch [ CD_A2-1.png ]. Each time you touch the key, repeat mode switches in the following sequence;
    DVD: "title repeat" rep_track.png, "chapter repeat" rep_chap.png, "function off"
    VCD (PBC On): Does not repeat
    VCD (PBC Off): "track repeat" CD_A2-1.png, "function off"
  • Fast forward or fast backward: Touch [A] or [B]. Each time you touch the key, the speed changes; standard, 2 times, 3 times.
  • For confirmation of play time: See #:##:##.
    • DVD: You can switch the time display between title play time, chapter play time, and title remaining time. Each time you touch, the display switches between “T #:##:##” (title play time display), “C #:##:##” (chapter play time display), and “R #:##:##” (title remaining time display).
      As well as the time display, the bar indicating current location appears.
    • VCD (PBC off): You can also confirm disc remaining time by touching time display. Each time you touch, the display switches between “P ##:##” (play time display) and “R ##:##” (disc remaining time).
  • For confirmation of current playing position: See the bar in center (DVD only). The bar does not appear while the remaining time is being displayed.

6 Movie display area

Touch to display Video screen.

7 Searching area

Touch to search the next/previous content.

Scrolling from center of display to left or right performs fast backward or fast forward. Each time you touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch center of the display.

8 Menu display area

This area functions differently depending on the current status.

  • During DVD playback: Displays the Movie control screen. During the menu display, displays the highlight control screen.
  • During VCD playback: Displays the Movie control screen. See Zoom Control for DVD and VCD.

9 Key display area

Touch to display the last control screen.

10 Screen setup display area

Touch and hold to display the screen control screen. See Monitor Screen Setup.

NOTE

  • If you use a remote controller, you can jump directly to the desired video scene by entering the chapter number, scene number, play time, etc Direct search mode.

Multi function menu

DVD

Control_DVD.png

VCD

Control_VCD.png

The functions of each key are as follows.

[E] [F]

Searches the previous/next content.

[DH]

Plays or pauses.

[¼] or [½] (DVD only)

Plays in slow motion forward or backward.

[I]

Stops playback. When touched twice, the disc is played from the beginning when you play it the next time.

[PBC] (VCD only)

Turn PBC on or off.

Contents