DNN991HD/ DNN9710BT>Voice Control (DNN991HD)>Voice Control

Voice Control

The unit is equipped with Advanced Voice Recognition function which allows you to operate it with your voice. The supported languages are US English, UK English, French, German, Dutch, Italian, and Spanish. For information on the voice commands, refer to <Voice command table>.

NOTE

  • ASR on the Language Setting screen should be set to “Enabled”. See Language setup.

  1. 1 Press the Push-To-Talk switch to enter the Voice control mode.

The buttons enclosed in a green square support the voice control.

  1. 2 Speak the command. (Ex: Speak “HD RADIO”.)

The screen has changed to the HD Radio Control screen.

You will hear a beep again.

  1. 3 Repeat the same procedure as step 2.

For information on the voice commands, refer to <Voice command table>.

  1. 4 Press the Push-To-Talk switch to end the voice control mode.

Displaying Voice Commands

To display the list of operable voice commands.

  1. 1 Press and hold the Push-To-Talk switch.

The list of operable voice commands appears. Pronounce a command.

NOTE

  • To cancel the commands list display, press Push-To-Talk switch or touch the screen.

Contents