DNN991HD/ DNN9710BT>DVD/Video CD (VCD) Operation>DVD Setup

DVD Setup

You can set up the DVD playback functions.

  1. 1 Touch [ ].

Quick menu appears.

  1. 2 Touch [SETUP].

SETUP Menu screen appears.

  1. 3 Touch [Source].

Source SETUP Menu screen appears.

  1. 4 Touch [DVD SETUP] in the list.

DVD SETUP screen appears.

  1. 5 Set each item as follows.

Menu/Subtitle/Audio Language*

See Language setup.

Dynamic Range Control*

Set the dynamic range.

Wide: The dynamic range is wide.

Normal: The dynamic range is normal.

Dialog (Default): Makes the total sound volume larger than other modes. This is effective only when you are using Dolby Digital software.

Angle Mark

Set an angle mark display.

ON (Default): An angle mark appears.

OFF: An angle mark does not appear.

Screen Ratio*

Set the screen display mode.

16:9 (Default): Displays wide pictures.

4:3 LB: Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen).

4:3 PS: Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends).

Parental Level*

See Parental level.

DISC SETUP

See Disc setup.

Stream Information

Displays the present source information.

The stream (Dolby Digital, Linear PCM, MPEG, WMA or AAC) appears.

* These items are disabled when a DVD is being played.

Language setup

This setting is for the language used in the menu, subtitle, and voice. You cannot setup these items during DVD playback.

  1. 1 Touch [SET] of the desired item; [Menu Language], [Subtitle Language], [Audio Language].

Language Set screen appears.

  1. 2 Enter the desired language code and touch [Enter].

For language code, refer to DVD Language Codes.

Sets the entered language and returns to the DVD SETUP screen.

NOTE

  • To cancel the setup and return to the previous screen, touch [Cancel].
  • To clear the entered code, touch [Clear].
  • To set the DVD’s original language for audio language, touch [Original].

Parental level

Set a parental lock level to prohibit children to watch video. You cannot set a parental lock level during DVD playback.

  1. 1 Touch [SET] of [Parental Level].

Parental Pass screen appears.

  1. 2 Enter the parental code and touch [Enter].

Parental Level screen appears.

NOTE

  • To cancel the setup and return to the previous screen, touch [Cancel].
  • To clear the entered code, touch [Clear].
  • Current parental lock level appears as [Level#].

  1. 3 Touch [C] or [D] to select a parental lock level.

NOTE

  • If a disc has higher parental lock level, you need to enter the code number.
  • The parental lock level varies depending on a loaded disc.
  • If a disc has no parental lock, anybody can play it even though you have set the parental lock.

Disc setup

Performs setup when using disc media.

  1. 1 Touch [SET] of [DISC SETUP].

DISC SETUP screen appears.

  1. 2 Select an option as follows.

CD Read

Sets the motion of this unit when a music CD is played.

1 (Default): Automatically recognizes and plays an audio file disc, a DVD or a music CD.

2: Forcibly plays a disc as a music CD. Select [2] if you wish to play a music CD having a special format or if you cannot play a disc with the option [1] set..

On Screen DVD

Sets an on-screen display.

Auto: When updated, information appears for 5 seconds.

OFF (Default): Information does not appear.

NOTE

  • [CD Read] is disabled when a disc is already in the unit.
  • You cannot play an audio file/VCD disc with the option [2] set. Also, you may not play some music CDs with the option [2] set.

Contents