DNN991HD/ DNN9710BT>Radio, HD Radio™ tuner Operation>Radio/ HD Radio tuner Basic Operation

Radio/ HD Radio tuner Basic Operation

Most functions can be controlled from the source control screen.

NOTE

  • Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation mode.
  • HD Radio broadcasting can be received only by the DNN991HD.
  • HD Radio broadcasting is for North American sales area only.
  • The screen shot below is for tuner. It may be different from the one for HD Radio broadcasting.

Simple Control screen

List Control screen

1 PS/Station name display

Displays the PS name or station name.

2 Information display/Control switching area

Displays the following information.

  • Picture: The picture data or station Logo data is displayed if available from current content.
  • [FM1] etc.: Band display
  • MHz/kHz: Frequency display
  • Preset #: Preset number
  • HD# (HD Radio tuner only): Channel display

Touch to switch between the Simple Control and List Control screen.

3 Multi function key

Touch to switch the multi function menu. For details on the menu, see Multi function menu.

4 Preset key/Multi function menu

Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving station or channel in memory.

When switched, various functions can be performed by using keys in this area.

For details on the menu, see Multi function menu.

5 Sub function key

Touch to display “Sub function menu” (7 in this table).

6 Preset list

Displays the list of preset stations or channels and the information.

7 Sub function menu

The following functions can be performed by using keys in this area.

  • Switches the band: Touch [AM] or [FM].
  • Tunes in a station: Touch [E] [F]. The method of frequency switching can be changed. See Seek mode.
  • Selects a channel (HD Radio tuner only): Touch [CH S] or [CH R].
  • Stores the information about the song being received: Touch [  ]. See Bookmark.
  • Tunes in by entering direct number (HD Radio tuner only):
    Touch [ ] and enter the desired number. For details, see Direct search.

The bar in center (tuner only) shows the current frequency location.

8 Sub function/ List switching key

Touch to display “Sub function menu” (7 in this table).

Touch and hold to switch between the preset list and the information list.

In HD Radio tuner mode, tuned program information will be displayed.

Multi function menu

The functions of each key are as follows.

[P1] - [P6]

Select the preset station. Touch for 2 seconds to store the current station into the preset memory.

[ ]

Select search method from preset station selection, channel selection or bookmark selection. For details on search operation, see Selecting Operation, Bookmark.

[TI] (FM Tuner and HD Radio tuner only)

Sets the traffic information mode on. For details, see Traffic Information.

[SEEK]

Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].

  • AUTO1: Tunes in a station with good reception automatically.
  • AUTO2: Tunes in stations in memory one after another.
  • MANUAL: Switches to the next frequency manually.

[AME]

Selects the auto memory mode. For details, see Auto memory.

[RCV] (HD Radio tuner only)

Switches the receive mode in the following sequence; [AUTO], [DIGITAL], [ANALOG]. For details, see Receive Mode.

[PTY] (FM Tuner and HD Radio tuner only)

Searches a program by setting program type. For details, see Search by program type.

[ 4 ] (Like)

Saves the artist name and the title by pressing it while your favorite song is being played. After saving, you can search for the song and play it from the list of the Summary Board using YouTube. See Summary Board Widget.

Contents