DNN991HD/ DNN9710BT>DVD/Video CD (VCD) Operation>DVD/VCD Basic Operation

DVD/VCD Basic Operation

Most functions can be controlled from the source control screen and playback screen.

NOTE

  • Set the remote controller mode switch to DVD mode before starting operation, see Switching the operation mode.
  • The screen shot below is for DVD. It may be different from the one for VCD.

Control screen

Video screen

1 Information display

Displays the following information.

  • Title #, Chap #: DVD title and chapter number display
  • Track #/Scene #: VCD track or scene number display
    *Scene # is displayed only when PBC is on.
  • D, B, F, I, etc.: Current play mode display
    The meanings of each icon are as follows; D (play), B (fast forward), A (fast backward), F (search up), E (search down), I (stop), IR (resume stop), H (pause), ½ (slow playback), ¼ (slow reverse playback).

Touch this area to display the disc lable name.

2 Multi function key

Touch to switch the multi function menu. For details on the menu, see Multi function menu.

3 Multi function menu

Various functions can be operated using keys in this menu. For details on the keys, see Multi function menu.

4 Control switching key

Unavailable in DVD/VCD source.

5 Sub function menu

The following functions can be performed by using keys in this area.

  • Repeats the current content: Touch [ ]. Each time you touch the key, repeat mode switches in the following sequence;
    DVD: "title repeat" , "chapter repeat" , "function off"
    VCD (PBC On): Does not repeat
    VCD (PBC Off): "track repeat" , "function off"
  • Fast forward or fast backward: Touch [A] or [B]. Each time you touch the key, the speed changes; standard, 2 times, 3 times.
  • For confirmation of play time: See #:##:##.
  • DVD: You can switch the time display between title play time, chapter play time, and title remaining time. Each time you touch, the display switches between “T #:##:##” (title play time display), “C #:##:##” (chapter play time display), and “R #:##:##” (title remaining time display).
    As well as the time display, the bar indicating current location appears.
  • VCD (PBC off): You can also confirm disc remaining time by touching time display. Each time you touch, the display switches between “P ##:##” (play time display) and “R ##:##” (disc remaining time).
  • For confirmation of current playing position: See the bar in center (DVD only). The bar does not appear while the remaining time is being displayed.

6 Movie display area

Touch to display Video screen.

7 Searching area

Touch to search the next/previous content.

Scrolling from center of display to left or right performs fast backward or fast forward. Each time you touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch center of the display.

8 Menu display area

This area functions differently depending on the current status.

  • During DVD playback: Displays the Movie control screen. During the menu display, displays the highlight control screen.
  • During VCD playback: Displays the Movie control screen. See Zoom Control for DVD and VCD.

9 Key display area

Touch to display the last control screen.

10 Screen setup display area

Touch and hold to display the screen control screen. See Monitor Screen Setup.

NOTE

  • If you use a remote controller, you can jump directly to the desired video scene by entering the chapter number, scene number, play time, etc Direct search mode.

Multi function menu

DVD

VCD

The functions of each key are as follows.

[E] [F]

Searches the previous/next content.

[DH]

Plays or pauses.

[¼] or [½] (DVD only)

Plays in slow motion forward or backward.

[I]

Stops playback. When touched twice, the disc is played from the beginning when you play it the next time.

[PBC] (VCD only)

Turn PBC on or off.

Contents