15-9. Switching between two connected cell-phones
When two Bluetooth devices are connected, you can assign the Bluetooth device to be used in priority to the other Bluetooth device.
When selecting the priority device using the button
- Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
- Press and hold [Ú] button.
The device given priority is changed.
When selecting the priority device from the Function setting mode
- Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
- Use the [Control knob] to select "DVC PRIORITY".
For how to use the [Control knob], refer to <3-3. How to select the item>.
- Turn the [Control knob] to select "MAIN" or "SUB".
- Press the [Control knob].
When Sub is selected, the device given priority is changed.
Exit the Bluetooth mode.
Press the [Ú] button.
Notes
- You cannot switch between the connected cell-phones during downloading of the Phone Book.
- Only the main cell-phone from which you can make a call.
- Both the main and sub cell-phones can receive an incoming call.
- If the other cell-phone receives an incoming call while you are talking on the active cell-phone, you must finish the current call to answer the incoming call to the other cell-phone.
- If the main cell-phone is disconnected when it is taken out of the vehicle, the sub cell-phone becomes the main cell-phone if it is held connected. When the disconnected cell-phone is brought back into the vehicle, it is reconnected as the sub cell-phone.
