10-6. Tuner setting
You can set up the tuner.
- Select the Tuner source.
Refer to <Source selection>.
- Press and hold the [AUDIO] button.
Enter the Function setting mode.
- Use the [Control knob] to select "SETTINGS".
For how to use the [Control knob], refer to <3-3. How to select the item>.
- Use the [Control knob] to select a Tuner setting item.
Display
Description
"SEEK MODE"
Sets the tuning mode.
"AUTO1": Automatic search for a station.
"AUTO2": Search in order of the stations in the preset memory.
"MANUAL": Normal manual tuning.
"MONO SET"
You can reduce the noise when stereo broadcasts are received as monaural.
"ON" / "OFF"
"TI"
Switches to the traffic information automatically when the traffic bulletin starts.
"ON" / "OFF"
(Colored text: Factory setting)
- Use the [Control knob] to select a setting.
The previous item appears.
Exit the Function setting mode.
Press and hold the [6] button.
