14-2. Registering a Bluetooth device
You can register your Bluetooth device in this unit.
- Start registering a unit by operating the Bluetooth device.
By operating the Bluetooth device, register the hands-free unit or audio unit (pairing).Select "DPX5**BT" (for DPX500BT) from the list of found units.
- If "PAIRING PASS ****** (Bluetooth device name) PRESS VOLUME KNOB" appears, proceed to step 4.
- Input the PIN code ("0000") in the Bluetooth device.
Check that registration is complete on the Bluetooth device. PIN code is set to "0000" as the default. You can change this code.
See <17-1. Registering the PIN code>
"PAIRING PASS ****** (Bluetooth device name) PRESS VOLUME KNOB" appears. - Press the [Control knob].
Pairing starts. When is it completed, "PAIRING OK" appears.
Bluetooth module that can be used with this unit
- For details on the Bluetooth cell-phone with the hands-free function, see <14-1. About the Bluetooth module>.
About automatic connection of the iPod touch or iPhone through Bluetooth
- This unit is compatible with an Apple Auto Pairing function. Connecting the iPod touch or iPhone to this unit with USB cable will automatically register it as a Bluetooth device. See <"AUTO PAIRING">.
1. The Bluetooth function of the iPod touch or iPhone is turned on first.
2. Connect an iPod touch or iPhone to the USB terminal.
3. Press the volume knob to pair once you have confirm the passcode.
When registration is impossible
- If there are 5 Bluetooth devices registered, you cannot register a new Bluetooth device.
- When any error code appears while the pairing is in progress, refer to <20-3. Error messages>.
When SMS is received
- When the connected Bluetooth device receives SMS, "SMS RECEIVE" is displayed on this unit.
