DPX405BT/DPX305U>10. Display settings>10-3. Display & Illumination setting

10-3. Display & Illumination setting

You can set the display and illumination.

  1. Press and hold the [AUDIO] button.

    Enter the Function setting mode.

  2. Use the [Control knob] to select "SETTINGS" > "DISP & KEY".

    For how to use the [Control knob], refer to <3-3. How to select the item>.

  3. Use the [Control knob] to select a Display & Illumination setting item.

    Display

    Description

    "DISP DIMMER"

    Dims the display part in conjunction with the Light switch of the vehicle.

    "DIM OFF": Does not dim the display.

    "DIM AUTO": Dims the display in conjunction with the Light switch of the vehicle.

    "DIM MANUAL1": Dims the display constantly.

    "DIM MANUAL2": Dims the display darker than that in the Manual1 mode.

    "TEXT SCROLL"

    Sets the method of scrolling to view hidden texts.

    "SCROLL AUTO" : Scrolls.

    "SCROLL ONCE" : Scrolls once.

    "SCROLL OFF" : Does not scroll.

    "DISP OFF MODE"

    Sets the clock and button illumination when "DISP OFF MODE" is selected as described in <10-4. Text Display Selection>.

    "CLOCK"

    "CLOCK ON" : Displays the clock.

    "CLOCK OFF" : Dims the clock.

    "KEY ILLUMI"

    "KEY ON" : Turns on the button illumination.

    "KEY OFF" : Dims the button illumination.

    "ILLUMI DIMMER"

    Reduces the key Illumination brightness.

    "DIM OFF": Does not dim the illumination.

    "DIM AUTO": Dims the illumination in conjunction with the Light switch of the vehicle.

    "DIM MANUAL1": Dims the illumination constantly.

    "DIM MANUAL2": Dims the illumination darker than that in the Manual1 mode.

    "BT DVC STATUS"

    You can display the connection status, signal strength, and battery level.

    HF-CON : Connection status for cell-phone. (1/: One cell-phone is connected, 1/2: Two cell-phones are connected, NO: No cell-phone is connected.)

    AD-CON : Connection status for BT Audio. (YES: Connected, NO: Not connected)

    BATT : Battery level of cell-phone.

    SIGNAL : Signal strength of cell-phone.

    (Function of DPX405BT)

    (Colored text: Factory setting)

  4. Use the [Control knob] to select a setting.

    The previous item appears.

Exit the Function setting mode.

Press and hold the [6] button.

Contents