KDC-X997/KDC-BT955HD/KDC-X897/KDC-BT855U/KDC-X697/KDC-655U/KMR-555U>15. Registering a Bluetooth (KDC-X997, KDC-BT955HD, KDC-X897, KDC-BT855U)>15-2. Registering a Bluetooth device

15-2. Registering a Bluetooth device

You can register your Bluetooth device in this unit.

  1. Start registering a unit by operating the Bluetooth device.

    Operate the Bluetooth device to request this unit for connection.

    The name of this unit ("KDC-####") is displayed on the Bluetooth device.

    When "Paring Press the volume knob" appears on this unit, operate step2.

  2. Press [Control] knob.

    Pairing starts. When pairing is completed, "Pairing Success" appears.

    Some Bluetooth device requests you to enter a PIN code. The PIN code is set to "0000" as default.

Bluetooth module that can be used with this unit

Registration of IPod touch or iPhone

  • This unit is compatible with an Apple Auto Pairing function. Connecting the iPod touch or iPhone to this unit with a Dock Connector to USB cable will automatically register it as a Bluetooth device. If you do not register it, select "OFF" for "Auto Pairing" according to <18-6. Bluetooth detail setting>.

When registration is impossible

  • If there are 5 Bluetooth devices registered, you cannot register a new Bluetooth device.
  • When any error code is displayed while the pairing is in progress, refer to <22-3. Error messages>.

When SMS is received

  • When the connected Bluetooth device receives SMS, "SMS Received" appears on this unit.

Contents