KDC-X997/KDC-BT955HD/KDC-X897/KDC-BT855U/KDC-X697/KDC-655U/KMR-555U>5. DSP settings (KDC-X997, KDC-BT955HD)>5-8. Channel level fine adjustments

5-8. Channel level fine adjustments

After DTA compensation, you can finely adjust the unsatisfactory speaker volume of respective speaker.

  1. Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob.

    Refer to <Source selection>.

  2. Press [Control] knob.

    Enters the Function setting mode.

  3. Select "Audio Control" > "Pro Setup" > "DTA Settings" > "Channel Level" using [Control] knob.

    For how to use [Control] knob, refer to <3-3. How to select the item>.

  4. Select a speaker using [Control] knob.




    Front Left speaker

    "Front" "L"

    -8 – 0 dB

    Front Right speaker

    "Front" "R"

    -8 – 0 dB

    Rear Left speaker

    "Rear" "L"

    -8 – 0 dB

    Rear Right speaker

    "Rear" "R"

    -8 – 0 dB

    Subwoofer Left

    "SW" "L"

    -8 – 0 dB

    Subwoofer Right

    "SW" "R"

    -8 – 0 dB

    (Colored text: Factory setting)

  5. Select a value using [Control] knob.

Exiting from the Function setting mode

Press and hold [1/6].