DNN9250DAB/ DNN6250DAB/ DNR8025BT>Controlling Audio>Controlling General Audio

Controlling General Audio

  1. 1 Touch [ ] on any screen.
  2. 2 Touch [Audio].

Audio screen appears.

  1. 3 Touch [Audio Control].

  1. 4 Set each item as follows.

Fader # / Balance #

Adjust the volume balance around the touched area.

[C] and [D] adjust the right and left volume balance.

[R] and [S] adjust the front and rear volume balance.

Volume Offset*

Finely adjust the volume of the current source to minimize the difference in volume between different sources.

Subwoofer Level

Adjust the subwoofer volume. This setting is not available when subwoofer is set to “None”. See Speaker setup.

Bass Boost

Set the amount of bass boost among “OFF”/ “Level1”/ “Level2”/ “Level3”.

* If you have increased the volume first, then reduced the volume using the “Volume Offset”, the sound generated if you suddenly switch to another source may be extremely loud.

Contents