INSTRUCTION MANUAL
CONNECTED NAVIGATION SYSTEM / CONNECTED MONITOR WITH DVD RECEIVER
The method for turning on the power varies between different models.
The unit is turned on.
Press the <HOME> button for 1 second.
If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup.
The unit is turned on.
Press the <HOME> button for 1 second.
If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup.
When you selected Administrator or Guest, you do not need to enter a password.
[Auto Login?]: Checking this checkbox allows you to log in to the system automatically from the next time.
NOTE
|
Perform this setup when you use this unit for the first time or when you reset the unit. See Resetting the Unit.
Language Setup |
Select the language used for the GUI and input methods. Default is “English (United States)”.
|
WiFi Setup |
Configure settings for connection to Wi-Fi.
For details on operation, see Wi-Fi Setup. |
Date Setup |
Set the date and time.
For details on operation, see Clock and Date Setup. |
Account Setup |
Set the information about the user of this unit.
For details on operation, see About Account. |
Locale |
Select the country for the navigation system.
|
Language |
Select the language used for the control screen and setting items. Default is “American English (en)”.
For details on operation, see Language setup. |
Angle (DNN9250DAB/DNR8025BT only) |
Adjust the position of the monitor. Default is “0”.
For details on operation, see Monitor angle control. |
Color |
Set the screen and button illumination color. You can select whether to allow color scan operation or select a fixed color for operation.
For details on operation, see Panel color coordinate. |
Camera |
Set the parameters for the camera.
For details on operation, see Camera Setup. |
DEMO |
Set the demonstration mode. Default is “ON”.
|
NOTE
|