Detaching The Front Panel
You can detach the front panel to prevent theft.
DNN9250DAB/ DNR8025BT
- 1 Press the <G> button for 1 second to open the front panel.
|
NOTE
- You can set the front panel to open automatically when the ignition is turned off. See Monitor angle control.
|
- 2 Detach the panel as the diagrams below.
|
NOTE
- The attaching plate closes automatically in about 10 seconds after the front panel is released. Remove the panel before this happens.
|
|
NOTE
- When detaching a part of the front panel, detach it toward the front side as shown in the diagram above. If it is detached upward, the front panel will be broken.
- To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.
- If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth.
|
DNN6250DAB
- 1 Slide the Release key upward to detach the part of the front panel.
- 2 Then, detach the panel as the diagrams below.
Attaching the front panel
- 1 Hold the panel securely so as not to drop it accidentally, and fit it onto the attaching plate until it is firmly locked.
DNN9250DAB/ DNR8025BT
DNN6250DAB
