DNN9250DAB/ DNN6250DAB/ DNR8025BT>Camera Control (DNN9250DAB/ DNR8025BT)>Camera Control

Camera Control (DNN9250DAB/ DNR8025BT)

When a CMOS-3xx (optional accessory) is connected, the camera can be controlled from this unit.

Preparation

  • [NAV/APPS Key Longer than 1 Second] must be set to “CAM”. See User interface.

You can adjust the camera angle of the camera system and display of the guideline.

  1. 1 Press the <NAV>/ <APPS> button for 1 second.

Camera view screen appears.

  1. 2 Adjust each item as follows.

1 Guideline

Pressing each time turns on or off the guideline display alternately.

2 Angle

Pressing each time changes camera angles in the following order:

Super wide view/ Wide view/ Overhead view/Wide view + Top view/ Corner view

3

Clearing the Camera View display.

Contents