DNN9250DAB/ DNN6250DAB/ DNR8025BT>Radio and TV Tuner Operation>Radio Basic Operation

Radio Basic Operation

Most functions can be controlled from the source control screen.

NOTE

Simple Control screen

List Control screen

1 PS/Station name display

Displays the PS name.

2 Information display/Control switching area

Displays the following information.

  • [FM1] etc.: Band display
  • MHz/kHz: Frequency display
  • Preset #: Preset number

Touch to switch between the Simple Control and List Control screen.

3 Multi function key

Touch to switch the multi function menu. For details on the menu, see Multi function menu.

4 Preset key/Multi function menu

Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving station or channel in memory.

When switched, various functions can be performed by using keys in this area.

For details on the menu, see Multi function menu.

5 Sub function key

Touch to display “Sub function menu” (7 in this table).

6 Preset list

Displays the list of preset stations and the information.

7 Sub function menu

The following functions can be performed by using keys in this area.

  • Switches the band: Touch [AM] or [FM].
  • Tunes in a station: Touch [E] [F]. The method of frequency switching can be changed. See Seek mode.
  • The bar in center (tuner only) shows the current frequency location.

8 Sub function/ List switching key

Touch to display “Sub function menu” (7 in this table).

Touch and hold to switch between the preset list and the information list.

In tuner mode, tuned program information will be displayed.

Multi function menu

The functions of each key are as follows.

[P1] - [P6]

Select the preset station. Touch for 2 seconds to store the current station into the preset memory.

[ ]

Displays the list of preset stations or services. For details, see Selecting Operation.

[TI] (FM Tuner only)

Sets the traffic information mode on. For details, see Traffic Information.

[SEEK]

Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].

  • AUTO1: Tunes in a station with good reception automatically.
  • AUTO2: Tunes in stations in memory one after another.
  • MANUAL: Switches to the next frequency manually.

[AME]

Selects the auto memory mode. For details, see Auto memory.

[PTY] (FM Tuner only)

Searches a program by setting program type. For details, see Search by program type.

[MONO] (FM Tuner only)

Select the Monaural reception.

[LO.S] (FM Tuner only)

Turns the Local Seek function on or off.

Contents