DNN9350BT/ DNN9350BTM/ DNR8035BT/ DNR8035BTM

DNN9350BT/ DNN9350BTM/ DNR8035BT/ DNR8035BTM>Controlling Audio>Zone Control

Zone Control

You can select different sources for both front and rear positions in the vehicle.

1 Touch [ ] on any screen.
2 Touch [Audio].

Audio screen appears.

3 Touch [Zone Control].

Zone Control screen appears.

4 Touch [Dual Zone].

5 Set each source as follows.

[D] (Front Source, Rear Source)

Select the audio source for each.

[S], [R] (Rear VOL.)

Adjust the rear channel volume.

[Single Zone]

Touch to turn off the dual zone function.

NOTE

When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.
When the dual zone function is set to on, the following functions are not available.
- Output from the subwoofer
- Subwoofer Level/Bass Boost
- Equalizer Control/ Sound Effect/ Listening Position
- DSP Bypass Control/ Speaker Setup/ Car Type Setup

Contents