DNN9350BT/ DNN9350BTM/ DNR8035BT/ DNR8035BTM>Setting Up>Camera Setup

Camera Setup

You can set camera parameters.

  1. 1 Touch [ ] on any screen.
  2. 2 Touch [SETUP].

SETUP Menu screen appears.

  1. 3 Touch [Camera].

Camera SETUP screen appears.

  1. 4 Set each item as follows.

Rear Camera*1

Select the type of rear camera to use.

CMOS-310: When the CMOS-3xx series with ID 1 set is connected.

Other (Default): When the other camera is connected.

R-CAM Interruption

Set a method for switching the display. Setting values are ON and OFF.

ON: Switches to the rear view camera video display when shifting to reverse or pressing the <NAV>*4/ <APPS>*4 button for 1 second.

OFF (Default): Switches to the rear view camera video display when pressing the <NAV>*4/ <APPS>*4 button for 1 second.

R-CAM Settings*2

Adjust the CMOS-3xx series with ID 1 set. For details, see the instruction manual of your camera.

Front Camera*1

Select the type of front camera to use.

CMOS-310: When the CMOS-3xx series with ID 2 set is connected.

Other: When the other camera is connected.

OFF (Default): When the front camera is not used.

F-CAM Settings*3

Adjust the CMOS-3xx series with ID 2 set. For details, see the instruction manual of your camera.

*1 These settings become settable only when the parking brake is on.

*2 This setting becomes settable only when the parking brake is on and the CMOS-3xx series is selected.

*3 This setting becomes settable only when the parking brake is on and “Front Camera” is set to [ON].

*4 [NAV/APPS Key Longer than 1 Second] must be set to “CAM”. See User interface.

Contents