DNN9350BT/ DNN9350BTM/ DNR8035BT/ DNR8035BTM

Functions of the Buttons on the Front Panel

NOTE

The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.

Number	Name	Motion
	s (Reset)	If the unit or the connected unit fails to operate properly, the unit returns to initial settings when this button is pressed (Á). If the SI function is turned on, this indicator flashes when the vehicle ignition is off (Á).
	S, R (Vol)	Adjusts volume.
	Remote Sensor	Receives the remote control signal.
	NAV (DNN9350BT/ DNN9350BTM)	Displays the navigation screen. Pressing for 1 second turns the screen off.*
	APPS (DNR8035BT/ DNR8035BTM)	Displays the APPS screen . Pressing for 1 second turns the screen off.*
	MENU	Displays the option menu screen. Pressing for 1 second switches AV out sources.
	HOME	Displays the Home screen (Á). Pressing for 1 second turns the power off. When the power off, turns the power on.
	6 (Back)	Return to the previously viewed screen. Pressing for 1 second displays the Hands Free screen (Á).
	G (Eject)	Ejects the disc. When the panel is opened, pressing closes the panel and pressing for 1 second ejects the disc forcibly. When the panel is closed, pressing for 1 second fully opens the panel to the location of the SD card slot.
	Disc insert slot	A slot to insert a disc media.
	SD card slot (DNN9350BT/ DNN9350BTM)	An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system.

* The function of the [NAV]/ [APPS] button can be changed to camera view function. See User interface.

1) Press <G> button for 1 second.

The panel fully opens.

2) Hold the SD card as the illustration in the right and insert it into the slot until it clicks.

To eject the card:
Push the card until it clicks and then remove your finger from the card.

The card pops up so that you can pull it out with your fingers.