DNN9350BT/ DNN9350BTM/ DNR8035BT/ DNR8035BTM>Network Setup>Wi-Fi Hotspot Setup

Wi-Fi Hotspot Setup

If there is no Wi-Fi access point, this unit becomes a Wi-Fi access point. You can connect your smartphone and your tablet PC, and enjoy Kenwood Wireless Link function. (Á)

Preparation

  • When Wi-Fi Hotspot is in use you can not connect to the Internet via Wi-Fi.
  • You can not use Wi-Fi setup and Wi-Fi Hotspot setup at the same time. You can make it effective either Wi-Fi or Wi-Fi Hotspot.
  • Set to OFF the Wi-Fi in Wi-Fi Setup.
  1. 1 Press the <HOME> button to display the Home screen.

Note

  • To display the Network contents panel, Press the <HOME> button again.

  1. 2 Press the <MENU> button.
  2. 3 Touch [Setting].

  1. 4 Touch [Portable hotspot].

  1. 5 Touch [Configure Wi-Fi hotspot].

  1. 6 Enter the SSID code. Select the security. Enter the password.

When you check Show password, the password that you set is displayed.

  1. 7 Touch [Save].
  2. 8 Touch [Portable Wi-Fi hotspot].

This unit works as the Wi-Fi access point.

Network Setup

Contents