KDC-X797/KDC-BT755HD>15. Bluetooth SETUP>15.1 Selecting the Bluetooth Device

15.1 Selecting the Bluetooth Device

When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use.

  1. Press [ Ú ] to enter Bluetooth mode.
  2. Turn the volume knob to select SETTINGS, then press the knob.
  3. Turn the volume knob to select PAIRING, then press the knob.
  4. Turn the volume knob to select PHONE SELECT or AUDIO SELECT, then press the knob.
  5. Turn the volume knob to select a Bluetooth device name.
  6. Press the volume knob to set up the Bluetooth device.
    • "* (device name)": The selected Bluetooth device is busy.
    • "- (device name)": The selected Bluetooth device is on standby.
    • "(blank) (device name)": The Bluetooth device is deselected.
    • If two cell-phones or an audio player have already been selected, deselect one device before selecting a new Bluetooth device.
  7. Press and hold [6] to exit.

To cancel the Bluetooth mode

Press [ Ú ].

When no device can be selected

  • If a cell-phone is already selected, deselect it, and then select a different one.
  • If you cannot select a device using the audio player, connect the device with the audio player.

Contents