KDC-X797/KDC-BT755HD>12. GETTING STARTED OF Bluetooth®>12.4 Bluetooth device registration test

12.4 Bluetooth device registration test

You can check whether your Bluetooth device can be registered using this unit.

  1. Press [ Ú ] to enter Bluetooth mode.
  2. Turn the volume knob to select BT TEST MODE, then press the knob.

    "PLEASE PAIR YOUR PHONE" appears.

  3. Search for this unit from the Bluetooth device.

    Select "KDC-X7***" (for KDC-X797)/ "KDC-BT7***HD" (for KDC-BT755HD) from the list of found units.

    If "(Bluetooth device name)" appears, proceed to step 5.

  4. Input the PIN code ("0000") in the Bluetooth device.

    Check that registration is complete on the Bluetooth device. PIN code is set to "0000" as the default. You can change this code.

    See <15.3 Registering the PIN code>

    "(Bluetooth device name)" appears.

  5. Press the volume knob.

    The connection result, "OK" (Enabled) or "NG" (Disabled), is displayed.

    • "PAIRING": Registration to this unit
    • "HF CNT": Hands-free phoning
    • "AUD CNT": Audio playback
    • "PB DL": Phone Book downloading
  6. Press [ Ú ] to exit pairing mode.

Note

  • Data (Phone Book, etc.) of the cell-phone checked for connection does not remain in this unit.

Error messages

  • PAIRING NG: Pairing error.

Contents