KDC-X797/KDC-BT755HD>13. HANDS-FREE PHONING>13.9 Switching between Two Connected Cell-phones

13.9 Switching between Two Connected Cell-phones

Switching by operating a button

  1. Press [ Ú ] to enter Bluetooth mode.
  2. Press and hold [ Ú ].

    Sub cell-phone is switched to main cell-phone.

    To switch the priority again, press and hold [ Ú ].

Switching by selecting from the menu

  1. Press [ Ú ] to enter Bluetooth mode.
  2. Turn the volume knob to select DVC PRIORITY, then press the knob.
  3. Turn the volume knob to select SUB-XXX.
  4. Press the volume knob.

    SUB-XXX is switched to MAIN-XXX and the priority is changed.

Notes

  • You cannot switch between the connected cell-phones during downloading of the Phone Book.
  • Only the main cell-phone from which you can make a call.
  • Both the main and sub cell-phones can receive an incoming call.
  • If the other cell-phone receives an incoming call while you are talking on the active cell-phone, you must finish the current call to answer the incoming call to the other cell-phone.
  • If the main cell-phone is disconnected when it is taken out of the vehicle, the sub cell-phone becomes the main cell-phone if it is held connected. When the disconnected cell-phone is brought back into the vehicle, it is reconnected as the sub cell-phone.

Contents