KDC-X797/KDC-BT755HD>10. AUDIO SETTINGS>10.1 Audio controls

10.1 Audio controls

You can adjust audio by setting the following audio control items;

  1. Press [8SRC] to select a source other than "STANDBY".
  2. Press the volume knob to enter Function mode.

    "FUNCTION" appears.

  3. Turn the volume knob to select AUDIO CONTROL, then press the knob.
  4. Turn the volume knob to select an audio control item, then press the knob.
    • See table below for selection.
    • Repeat step 4 until the desired item is selected/activated.
    • Press [ 6 ] to return to the previous item.
  5. Press and hold [6] to exit.

    Display

    Description

    SUB-W LEVEL*1

    –15 to +15 (0): Adjust the subwoofer output level.

    BASS LEVEL

    –8 to +8 (0): Adjust the level to memorize in each source. (Before making an adjustment, select the source you want to adjust.)

    MID LEVEL

    TRE LEVEL

    EQ PRO (for KDC-X797)

    BASS ADJUST

    BASS CTR FRQ

    60/ 80/ 100/ 200: Select the center frequency.

    BASS LEVEL

    –8 to +8 (0): Adjust the level.

    BASS Q FACTOR

    1.00/ 1.25/ 1.50/ 2.00: Adjust the quality factor.

    BASS EXTEND

    ON: Turns on the extended bass. ;
    OFF: Turns off the extended bass.

    MID ADJUST

    MID CTR FRQ

    0.5K/ 1.0K/ 1.5K/ 2.5K: Select the center frequency.

    MID LEVEL

    –8 to +8 (0): Adjust the level.

    MID Q FACTOR

    0.75/ 1.00/ 1.25: Adjust the quality factor.

    TRE ADJUST

    TRE CTR FRQ

    10.0K/ 12.5K/ 15.0K/ 17.5K: Select the center frequency.

    TRE LEVEL

    –8 to +8 (0): Adjust the level.

    PRESET EQ

    NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Select a preset sound mode suitable to the music genre. (Select "USER" to use the customized bass, middle, and treble settings.)

    BASS BOOST

    LV1/ LV2/ LV3: Select your preferred bass boost level. ; OFF: Disables level selection.

    LOUDNESS

    LV1/ LV2: Select your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF: Disables level selection.

    BALANCE

    L15 to R15 (0): Adjust the left and right speaker output balance.

    FADER

    R15 to F15 (0): Adjust the rear and front speaker output balance.

    SUBWOOFER SET

    ON: Turns on the subwoofer output. ;
    OFF: Turns off the subwoofer output.

    DETAILED SET

    HPF

    THROUGH: All signals are sent to the front speaker. ;
    100/ 120/ 150 (HZ): Frequencies lower than the specified value are cut off.

    LPF SUBWOOFER*1

    THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/160HZ: Frequencies higher than the specified value are cut off.

    SUB-W PHASE*1

    REVERSE (180°)/ NORMAL (0°): Select the phase angle of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than "THROUGH" is selected for "LPF SUB-W".)

    SUPREME SET

    ON: Creates realistic sound by interpolating the high-frequency components that are lost in MP3/WMA/AAC/WAV audio compression and iPod. ;
    OFF: Disables creation. (Selectable only when playing back an MP3/WMA/AAC/WAV disc, USB device or iPod.)

    VOLUME OFFSET

    –8 to +8 (0) (for AUX) ; –8 to 0 (for other sources): Presets the volume adjustment level of each source. The volume level will automatically increase or decrease when you change the source. (Before making an adjustment, select the source you want to adjust.)

    (Colored text: Factory setting)

    *1 "SUB-W LEVEL"/ "LPF SUBWOOFER"/ "SUB-W PHASE" is selectable only if "SUBWOOFER SET" is set to "ON".

About Supreme

  • Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate.

    Supplementing is optimized by compression format (AAC, MP3, WMA or WAV) and processed according to bit rate.

    The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

Contents