KDC-DAB43U/KDC-DAB4557U>3. GENERAL>3.3 Changing the initial settings

3.3 Changing the initial settings

You can change an initial setting item(s) according to your viewing or listening preference

  1. Press [8SRC] to select STANDBY.
  2. Press the volume knob to enter Function mode.

    "FUNCTION" appears.

  3. Turn the volume knob to select INITIAL SET, then press the knob.
  4. Turn the volume knob to select a desired setting item, then press the knob.
    • See table below for selection.
    • Press [ 6 ] to return to the previous item.
  5. Press and hold [6] to exit.

    Item

    Description

    PRESET TYPE

    NORMAL: Memorizes one station or channel for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW/ DB1/ DB2/ DB3). ;
    MIX: Memorizes one station or channel for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW/ DB1/ DB2/ DB3).

    KEY BEEP

    ON/ OFF: Activates/deactivates tone emission when a key is pressed.

    RUSSIAN SET

    ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;
    OFF: Not displayed in Russian.

    P-OFF WAIT

    Set the duration until the unit will automatically turn off (while in standby mode) to save the battery.

    "–––" : Cancels ; 20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes

    BUILTIN AUX

    ON: Enables AUX in source selection. ;
    OFF: Disables.

    CD READ

    "1": Automatically distinguishes between audio file disc and music CD. ; "2": Forces to play as a music CD. No sound can be heard if an audio file disc is played.

    DAB L-BAND

    ON: Receives L-BAND ensemble with DAB source. ; OFF: Set when there is no L-BAND broadcast station. Ensemble search and Service List information update will be faster.

    DAB ANT PWR

    ON: Supplies power to the DAB antenna. Set when using the antenna included with KDC-DAB43U. ;
    OFF: Does not supply power. Set when using passive antenna without booster.

    SWITCH PRE

    REAR/ SUB-W: Select whether rear speakers or a subwoofer are connected to the line out terminals on the rear of the unit (through an external amplifier).

    SP SELECT

    OFF / 5/4 / 6×9/6 / OEM: Select the speaker size for optimum performance.

    F/W UPDATE

    UPDATE SYS

    The current firmware version is displayed.

    Press the volume knob to update DAB or system firmware.

    YES: Starts upgrading the firmware. ; NO: Does not upgrade firmware.

    For details on how to update the firmware, see: www.kenwood.com/cs/ce/

    UPDATE DAB

    (Colored text: Factory setting)

Contents