KDC-DAB43U/KDC-DAB4557U>5. DIGITAL RADIO (DAB)>5.8 Changing the digital radio settings

5.8 Changing the digital radio settings

You can change a digital radio setting item(s) according to your listening preference.

  1. Press the volume knob to enter Function mode.

    "FUNCTION" appears.

  2. Turn the volume knob to select SETTINGS, then press the knob.
  3. Turn the volume knob to select a desired setting item, then press the knob.
    • See table below for selection.
    • Press [ 6 ] to return to the previous item.
  4. Press and hold [6] to exit.

    Item

    Description

    SEEK MODE

    Sets the tuning mode.

    Press E/ F

    Press and hold E/ F

    AUTO1

    Select an ensemble, service or component.

    Automatically searches for an ensemble.

    AUTO2

    Search in the order of the services in the preset memory.

    —

    MANUAL

    Select an ensemble, service or component.

    Manually search for an ensemble

    PRIORITY

    ON: Switches automatically to FM and enables listening of same program when DAB signal strength becomes weak. In DAB to FM case, the unit keeps DAB source. And it returns DAB sound when DAB reception becomes good again. Also, when listening to FM, switches to DAB source if there is same program in DAB. ;
    OFF: Does not switch to FM automatically.

    ASW SELECT

    Refer to <5.7 Announcement select>.

    LIST UPDATE

    AUTO: Automatically updates the DAB Service List when ACC is turned ON. ;
    MANU: Updates the DAB Service List when DAB button is pressed.

    PTY SEARCH

    Refer to <5.5 PTY (Program Type)>.

    PTY WATCH

    Refer to <5.6 PTY Watch Select>.

    LANG SELECT

    Select the language to be used for DAB source "ASW SELECT"/ "PTY SEARCH"/ "PTY WATCH", and TUNER source "PTY SEARCH".

    ENGLISH/ FRENCH/ GERMAN

    TI

    ON: Temporarily switches to Traffic Information. ;
    OFF: Does not switch to Traffic information

    DAB SET

    TI

    Selectable only if any source other than DAB source is selected.

    PRIORITY

    ASW SELECT

    LIST UPDATE

    (Colored text : Factory setting)

Contents