KDC-DAB43U/KDC-DAB4557U>8. AUDIO SETTINGS>8.1 Audio controls

8.1 Audio controls

You can adjust audio by setting the following audio control items;

  1. Press [8SRC] to select a source other than "STANDBY".
  2. Press the volume knob to enter Function mode.

    "FUNCTION" appears.

  3. Turn the volume knob to select AUDIO CTRL, then press the knob.
  4. Turn the volume knob to select an audio control item, then press the knob.
    • See table below for selection.
    • Repeat step 4 until the desired item is selected/activated.
    • Press [ 6 ] to return to the previous item.
  5. Press and hold [6] to exit.

    Display

    Description

    SUB-W LEVEL*1,2

    –15 to +15 (0): Adjust the subwoofer output level.

    BASS LEVEL

    –8 to +8 (0): Adjust the level to memorize in each source. (Before making an adjustment, select the source you want to adjust.)

    MID LEVEL

    TRE LEVEL

    EQ PRO

    BASS ADJUST

    BASS C FRQ

    60/ 80/ 100/ 200: Select the center frequency.

    BASS LEVEL

    –8 to +8 (0): Adjust the level.

    BASS Q FCTR

    1.00/ 1.25/ 1.50/ 2.00: Adjust the quality factor.

    BASS EXTEND

    ON: Turns on the extended bass. ;
    OFF: Turns off the extended bass.

    MID ADJUST

    MID C FRQ

    0.5K/ 1.0K/ 1.5K/ 2.5K: Select the center frequency.

    MID LEVEL

    –8 to +8 (0): Adjust the level.

    MID Q FCTR

    0.75/ 1.00/ 1.25: Adjust the quality factor.

    TRE ADJUST

    TRE C FRQ

    10.0K/ 12.5K/ 15.0K/ 17.5K: Select the center frequency.

    TRE LEVEL

    –8 to +8 (0): Adjusts the level.

    PRESET EQ

    NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Select a preset sound mode suitable to the music genre. (Select "USER" to use the customized bass, middle, and treble settings.)

    BASS BOOST

    LV1/ LV2/ LV3: Select your preferred bass boost level. ; OFF: Disables level selection.

    LOUDNESS

    LV1/ LV2: Select your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF: Disables level selection.

    BALANCE

    L15 to R15 (0): Adjust the left and right speaker output balance.

    FADER

    R15 to F15 (0): Adjust the rear and front speaker output balance.

    SUB-W SET*1

    ON: Turns on the subwoofer output. ;
    OFF: Turns off the subwoofer output.

    DETAIL SET

    LPF SUB-W*1,2

    THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/160HZ: Frequencies higher than the specified value are cut off.

    SUB-W PHASE*1,2

    REV (180°)/ NORM (0°): Select the phase angle of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than "THROUGH" is selected for "LPF SUB-W".)

    SUPREME SET

    ON: Creates realistic sound by interpolating the high-frequency components that are lost in MP3/WMA/AAC audio compression. ;
    OFF: Disables creation. (Selectable only when playing back an MP3/WMA/AAC disc or a USB device, except iPhone/iPod.)

    VOL OFFSET

    –8 to +8 (0) (for AUX) ; –8 to 0 (for other sources): Presets the volume adjustment level of each source. The volume level will automatically increase or decrease when you change the source. (Before making an adjustment, select the source you want to adjust.)

    (Colored text: Factory setting)

    *1 "SUB-W LEVEL"/ "SUB-W SET"/ "LPF SUB-W"/ "SUB-W PHASE" is selectable only if "SWITCH PRE" is set to "SUB-W".

    *2 "SUB-W LEVEL"/ "LPF SUB-W"/ "SUB-W PHASE" is selectable only if "SUB-W SET" is set to "ON".

About Supreme

Contents