KDC-X998/KDC-BT958HD/KDC-X898/KDC-BT858U>11. Listen to the tuner (KDC-X898, KDC-BT858U)>11-5. Tuner setting

11-5. Tuner setting

You can set up the tuner.

  1. Press [SRC] and select a Tuner ("TUNER") source using [Control] knob.

    Refer to <Source selection>.

  2. Press [Control] knob.

    Enters the Function setting mode.

  3. Select "Settings" using [Control] knob.

    For how to use [Control] knob, refer to <3-3. How to select the item>.

  4. Select a Tuner setting item using [Control] knob.

    Display

    Description

    "Seek Mode"

    Sets the seek mode.

    "Auto1": Automatic search for a station.

    "Auto2": Search in order of the stations in the preset memory.

    "Manual": Normal manual tuning.

    "Auto Memory"

    Memorizes 18 (FM) or 6 (AM) stations with good reception automatically.

    Refer to <11-3. Auto memory>.

    "MONO"[1]

    You can reduce the noise when stereo broadcasts are received as monaural.

    "ON" / "OFF"

    "PTY Search"[1]

    Selects the Program Type and searches for a station.

    Refer to <11-7. PTY (Program Type)>.

    "TI"[1]

    Switches to the traffic information automatically when the traffic bulletin starts.

    "ON" / "OFF"

    (Colored text: Factory setting)

    [1] Displayed only when FM broadcast is received.

  5. Select a setting using [Control] knob.

    Returns to the previous item.

Exiting from the Function setting mode

Press and hold [1/6].

Contents