KDC-X998/KDC-BT958HD/KDC-X898/KDC-BT858U>5. DSP settings (KDC-X998, KDC-BT958HD)>5-10. DSP preset

5-10. DSP preset

You can register the values set the DSP control items.

  1. Set the DSP control items

    Refer to the following operations to setup the Sound Control.

  2. Press [Control] knob.

    Enters the Function setting mode.

  3. Select "Audio Control" > "Pro Setup" > "Audio Preset" > "Memory" using [Control] knob.

    For how to use [Control] knob, refer to <3-3. How to select the item>.

  4. Select a memory number ("Memory 1" or "Memory 2") using [Control] knob.
  5. Select "YES" using [Control] knob.

    "Memory Completed" appears.

Exiting from the Function setting mode

Press and hold [1/6].

When reset

  • When this unit is reset, all setting values stored in "Memory 1" are applied to the source.

Contents