3-2. Preparations
Cancel the Demonstration mode
Cancel the Demonstration mode when you use the unit for the first time after installation.
- Press [Control] knob to cancel the Demonstration mode when the message "To cancel DEMO Press the volume knob" appears (approx. 15 seconds).
- Turn [Control] knob to select the "YES", and then press [Control] knob.
The Demonstration mode can also be canceled in the Function Setting mode. Refer to <14-4. Demonstration mode setting>.
Detaching/ Attaching the faceplate
!
- Remove the faceplate at once after pressing the Release button; otherwise it can fall down due to vibration.
- The faceplate is a precision component of the unit and can be damaged by shocks or jolts.
- Keep the faceplate in its case while detached.
- Do not place the faceplate (and case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
