KDC-X998/KDC-BT958HD/KDC-X898/KDC-BT858U

5-5. X'Over setting

Fine adjusting the following setting values corresponding to the X'Over values set in the section <5-4. Speaker setting>.

1. Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob.

   Refer to <Source selection>.

2. Press [Control] knob.

   Enters the Function setting mode.

3. Select "Audio Control" > "Pro Setup" > "X'Over" using [Control] knob.

   For how to use [Control] knob, refer to <3-3. How to select the item>.

4. Select a speaker type using [Control] knob.

   Speaker type	Setting item	Setting value
   "Front"	"FC"	Front high pass filter KDC-X998 Through, 30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, 250 Hz KDC-BT958HD Through, 40, 60, 70, 80, 100, 120, 150, 180, 220 Hz
   	"SLOPE"[1][2]	Front high pass slope -6, -12, -18, -24 dB/Oct
   	"GAIN"	Front gain -8 ,-7, -6, -5, -4, -3, -2, -1, 0 dB
   "Rear"	"FC"	Rear high pass filter KDC-X998 Through, 30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, 250 Hz KDC-BT958HD Through, 40, 60, 70, 80, 100, 120, 150, 180, 220 Hz
   	"SLOPE"[1][2]	Rear high pass slope -6, -12, -18, -24 dB/Oct
   	"GAIN"	Rear Gain -8, -7, -6, -5, -4, -3, -2, -1, 0 dB
   "SubWoofer"	"FC"	Subwoofer low pass filter KDC-X998 30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, 250, Through Hz KDC-BT958HD 40, 60, 70, 80, 100, 120, 150, 180, 220, Through Hz
   	"SLOPE"[1][2]	Subwoofer slope -6, -12, -18, -24 dB/Oct
   	"GAIN"	Subwoofer gain -8 ,-7, -6, -5, -4, -3, -2, -1, 0 dB
   	"PHASE"	Subwoofer phase "REV" (180°)/ "NML" (0°)
   "Tweeter"[2]	"FC"	Shelving filter 1, 1.6, 2.5, 4, 5, 6.3, 8, 10, 12.5 kHz
   	"Volume"	Tweete volume -8 ,-7, -6, -5, -4, -3, -2, -1, 0 dB

   (Colored text: Factory setting)

   [1] Displayed only when "FC" is set to a value other than "Through".

   [2] Function of KDC-X998.

5. Select a setting item using [Control] knob.
6. Select a setting value using [Control] knob.

Exiting from the Function setting mode

Press and hold [1/6].

Contents

• 1. Before use
  • 1-1. Safety precaution
  • 1-2. Important information
  • 1-3. Regulatory Compliance
• 2. Appendix
  • 2-1. Specifications
  • 2-2. Trademarks
• 3. Basic operations
  • 3-1. Component names
  • 3-2. Preparations
  • 3-3. How to select the item
  • 3-4. Adjusting the clock
  • 3-5. General operations
• 4. Audio adjustments (KDC-X898, KDC-BT858U)
  • 4-1. Audio control
  • 4-2. Audio preset
  • 4-3. Audio preset recall
• 5. DSP settings (KDC-X998, KDC-BT958HD)
  • 5-1. Audio control
  • 5-2. Manual equalizer control
  • 5-3. Car type selection
  • 5-4. Speaker setting
  • 5-5. X'Over setting
  • 5-6. Listening position setting
  • 5-7. Delay time control
  • 5-8. Channel level fine adjustments
  • 5-9. Resetting of DTA Settings
  • 5-10. DSP preset
  • 5-11. DSP preset recall
• 6. Listen to the iPod
  • 6-1. Models of iPods/iPhones that can be connected to this unit
  • 6-2. Playing music
  • 6-3. Music search
  • 6-4. Alphabet search
  • 6-5. Direct search
  • 6-6. Skip search
  • 6-7. Skip search ratio setting
  • 6-8. Playback mode
  • 6-9. App & iPod mode setting search
• 7. Pandora®
  • 7-1. Requirements Pandora®
  • 7-2. Listening to Pandora®
  • 7-3. Basic operation
  • 7-4. Station search
  • 7-5. Bookmark registration
  • 7-6. New Station Creation
  • 7-7. Deletion of station
  • 7-8. Pandora source control
• 8. Aha Radio
  • 8-1. Requirements Aha™
  • 8-2. Listening to the Aha Radio
  • 8-3. Basic operations
  • 8-4. Station search
  • 8-5. Calling a number in the content
  • 8-6. Aha source control
• 9. iHeartRadio
  • 9-1. Requirements iHeartRadio™
  • 9-2. Listening to the iHeartRadio
  • 9-3. Basic operations
  • 9-4. Station search
  • 9-5. Station scan
  • 9-6. Favorite station delete
  • 9-7. iHeartRadio source control
• 10. Listen to the CD/ Audio file
  • 10-1. Playing music
  • 10-2. Music search
  • 10-3. Skip search
  • 10-4. Skip search ratio setting
  • 10-5. Playback mode
  • 10-6. Direct music search
  • 10-7. Drive change
  • 10-8. About the Audio file
  • 10-9. About the USB device
  • 10-10. About "KENWOOD Music Editor Light" and "KENWOOD Music Control"
  • 10-11. About the discs used with this unit
  • 10-12. Handling discs
• 11. Listen to the tuner (KDC-X898, KDC-BT858U)
  • 11-1. Listening to the radio
  • 11-2. Station preset memory
  • 11-3. Auto memory
  • 11-4. Recall preset station
  • 11-5. Tuner setting
  • 11-6. Direct access tuning
  • 11-7. PTY (Program Type)
• 12. Listen to the HD Radio™ tuner (KDC-X998, KDC-BT958HD)
  • 12-1. About HD Radio™ Technology
  • 12-2. Listening to the HD Radio tuner
  • 12-3. Station preset memory
  • 12-4. Auto memory
  • 12-5. Recall preset station
  • 12-6. iTunes tagging
  • 12-7. Direct access tuning
  • 12-8. HD Radio tuner setting
• 13. Display settings
  • 13-1. Selecting a display type
  • 13-2. Information display setting
  • 13-3. Illumination color selection
  • 13-4. Adjusting the Illumination color
  • 13-5. Selecting a text display
  • 13-6. Display & Illumination setting
• 14. General settings
  • 14-1. Adjusting the date
  • 14-2. Clock & date display type setting
  • 14-3. Auxiliary input display setting
  • 14-4. Demonstration mode setting
  • 14-5. Initial settings
• 15. Registering a Bluetooth
  • 15-1. About the Bluetooth module
  • 15-2. Registering a Bluetooth device
  • 15-3. Selecting the Bluetooth device you wish to connect
  • 15-4. Deleting a registered Bluetooth device
  • 15-5. Bluetooth device registration test
• 16. Hands-free phoning
  • 16-1. Receiving a call
  • 16-2. Calling a number in the phone book
  • 16-3. Dialing a number
  • 16-4. Calling a number in the call log
  • 16-5. Speed dialing (Preset dial)
  • 16-6. Registering in the preset dial number list
  • 16-7. During a call
  • 16-8. Clearing the disconnection message
  • 16-9. Voice Control
  • 16-10. Display of phone number types (categories)
• 17. Bluetooth audio
  • 17-1. Before use
  • 17-2. Basic operations
  • 17-3. Playback mode
• 18. Bluetooth settings
  • 18-1. Registering the PIN code
  • 18-2. Downloading the phone book
  • 18-3. Deleting the phone book
  • 18-4. Displaying the firmware version
  • 18-5. Switching between two connected cell-phones
  • 18-6. Bluetooth detail setting
• 19. SiriusXM® Satellite Radio (optional tuner and service required)
  • 19-1. Before use
  • 19-2. Listening to the SiriusXM® Satellite Radio
  • 19-3. Category and channel search
  • 19-4. Channel preset memory
  • 19-5. Preset tuning
  • 19-6. Smart Favorites, Tune Start™
  • 19-7. Direct access tuning
  • 19-8. iTunes tagging
  • 19-9. Parental Lock setting
  • 19-10. Clearing the Parental Lock setting
  • 19-11. Setting Parental Lock for Mature content
  • 19-12. Parental Lock pass code setting
  • 19-13. Setting the Song and Artist Alerts
  • 19-14. Song or Artist setting
  • 19-15. Editing a Song or Artist item
  • 19-16. Delete a Song or Artist item
  • 19-17. SiriusXM® Replay
  • 19-18. Channel skip setting
  • 19-19. Clearing the channel skip setting
  • 19-20. SiriusXM tuner setting
• 20. Basic operation of remote control
  • 20-1. Before using remote control
  • 20-2. Basic opreation
• 21. Troubleshooting guide
  • 21-1. Setting error
  • 21-2. Operation/wiring error
  • 21-3. Error messages