INSTRUCTION MANUAL
CD-RECEIVER
Open the Disc slot cover upward.
Insert a disc in the Disc slot.
When it is inserted, the source is switched automatically and playback starts.
Close the Disc slot cover.
Connect a USB device to the USB terminal.
[1] Front USB terminal
[2] Rear USB terminal
[3] optional accessory
You can connect the iPod or USB device to either one of the USB terminals provided at the front and rear of this unit.
When it is connected, the source is switched automatically and playback starts.
Press [R] or [S] button.
Press [E] or [F].
Press and hold [E] or [F].
Open the Disc slot cover upward.
Press [SRC] to switch the source to a device other than USB, and then remove the USB device.
Data contained in the USB device may be damaged if you remove it when it is used as the active source.