KDC-BT73DAB/KDC-BT53U/KDC-5057SD

11-5. Selecting a text display

You can change the information displayed on each of the following sources:

1. Press [Control] knob.

   Enters the Function setting mode.

2. Select "DISP&ILLUMI" > "Display Select" > "Text Select" using [Control] knob.

   For how to use [Control] knob, refer to <3-3. How to select the item>.

3. Press [R] or [S] to select a text display part.

   The selected text display part blinks.

4. Select a text display using [Control] knob.

On Audio file/ iPod source

Information	Display
Song title*	"Song Title"
Album name*	"Album Name"
Artist name*	"Artist Name"
Title and Artist name**	"Title/Artist"
Album and Artist name**	"Album/Artist"
Folder name	"Folder Name"
File name	"File Name"
Play time	"P-Time"
Spectrum analysis and Clock[1]	"Speana/Clock"
Clock[2]	"Clock"
Date	"Date"
Blank	"Blank"

On CD source

Information	Display
Disc title	"Disc Title"
Track title	"Track Title"
Play time	"P-Time"
Spectrum analysis and Clock[1]	"Speana/Clock"
Clock[2]	"Clock"
Date	"Date"
Blank	"Blank"

KDC-BT73DAB On Digital Radio source

Information	Display
Service label	"Service Label"
PTY label	"PTY Label"
Ensemble label	"Ensemble Label"
Artist name*	"Artist Name"
Song title*	"Song Title"
Album name*	"Album Name"
Genre	"Genre"
Channel number	"Channel Number"
Name information of next program	"Next Program"
Audio Bitrate	"BIT Rate"
Antenna reception sensitivity	"Signal Level"
Spectrum analysis and Clock	"Speana/Clock"
Date	"Date"
Blank	"Blank"

On Tuner source

Information	Display
Station name (FM)	"Station Name"
Radio text + (FM)[3]	"Radio Text +"
Radio text (FM)[3]	"Radio Text"
Spectrum analysis and Clock[1]	"Speana/Clock"
Clock[2]	"Clock"
Date	"Date"
Blank	"Blank"
Frequency	"Frequency"
Song title (FM)*	"Song Title"
Artist name (FM)*	"Artist Name"
Title & Artist name (FM)**	"Title/Artist"

KDC-BT73DAB KDC-BT53U On Bluetooth audio source

Information	Display
Play time	"P-Time"
Song title*	"Song Title"
Album name*	"Album Name"
Artist name*	"Artist Name"
Song title and Artist name**	"Title/Artist"
Album name and Artist name**	"Album/Artist"
Spectrum analysis and Clock	"Speana/Clock"
Date	"Date"
Blank	"Blank"

On Standby/ Auxiliary input source

Information	Display
Source name (AUX only)	"Source Name"
Spectrum analysis and Clock (AUX only)[1]	"Speana/Clock"
Clock	"Clock"
Date	"Date"
Blank	"Blank"

[1] Function of KDC-BT73DAB/ KDC-BT53U.

[2] Function of KDC-5057SD.

[3] Function of KDC-BT73DAB.

*Display type A only

**Display type B only

Exiting from the Function setting mode

Press and hold [1/6].

Notes on text display

• If the selected display item does not have any information, alternative information is displayed.
• Setting is available when the display type is A or B which allows text display. Refer to <11-1. Selecting a display type>.
• Some items cannot be selected depending on the display type and row.
• If you select "Folder name" while playing music on the iPod, names will be displayed depending on the currently selected browsing items.
• If you select the APP & iPod Control mode while playing music on the iPod, "APP & iPod Mode" appears.
• If all characters cannot be displayed while music is played on the iPod, the file number in the list is displayed.

  Information	Display
  Music title	"TITLE***"
  Folder name	"FLD***"
  File name	"FILE***"

• Text display cannot be switched during aha source.

Contents

• 1. Before use
  • 1-1. Safety precaution
  • 1-2. Important information
  • 1-3. Regulatory Compliance
• 2. Appendix
  • 2-1. Specifications
  • 2-2. Trademarks
• 3. Basic operations
  • 3-1. Component names
  • 3-2. Preparations
  • 3-3. How to select the item
  • 3-4. General operations
• 4. Audio adjustments (KDC-5057SD)
  • 4-1. Audio control
  • 4-2. Audio preset
  • 4-3. Audio preset recall
• 5. DSP settings (KDC-BT73DAB, KDC-BT53U)
  • 5-1. Audio control
  • 5-2. Manual equalizer control
  • 5-3. Car type selection
  • 5-4. Speaker setting
  • 5-5. X’Over setting
  • 5-6. Listening position setting
  • 5-7. Delay time control
  • 5-8. Channel level fine adjustments
  • 5-9. Resetting of DTA Settings
  • 5-10. DSP preset
  • 5-11. DSP preset recall
• 6. Listen to the iPod
  • 6-1. Models of iPods/iPhones that can be connected to this unit
  • 6-2. Playing music
  • 6-3. Music search
  • 6-4. Alphabet search
  • 6-5. Direct search
  • 6-6. Skip search
  • 6-7. Skip search ratio setting
  • 6-8. Playback mode
  • 6-9. App & iPod mode setting
• 7. Aha Radio (KDC-BT73DAB, KDC-BT53U)
  • 7-1. Requirements Aha™
  • 7-2. Listening to the Aha Radio
  • 7-3. Basic operations
  • 7-4. Station search
  • 7-5. Calling a number in the content
  • 7-6. Aha source control
• 8. Listen to the CD/ Audio file
  • 8-1. Playing music
  • 8-2. Music search
  • 8-3. Skip search
  • 8-4. Skip search ratio setting
  • 8-5. Playback mode
  • 8-6. About the Audio file
  • 8-7. About the USB device
  • 8-8. About SD card
  • 8-9. About "KENWOOD Music Editor Light" and "KENWOOD Music Control"
  • 8-10. About the discs used with this unit
  • 8-11. Handling discs
• 9. Listen to the tuner
  • 9-1. Listening to the radio
  • 9-2. Station preset memory
  • 9-3. Auto memory
  • 9-4. Recall preset station
  • 9-5. Tuner setting
  • 9-6. PTY (Program Type)
• 10. Listen to the Digital Radio (KDC-BT73DAB)
  • 10-1. Listening to the Digital Radio
  • 10-2. Service preset memory
  • 10-3. Recall preset service
  • 10-4. Service list select
  • 10-5. Alphabet Search for service
  • 10-6. PTY (Program Type)
  • 10-7. Announcement setup
  • 10-8. Replay
  • 10-9. Digital Radio setting
  • 10-10. Digital Radio initial settings
• 11. Display settings
  • 11-1. Selecting a display type
  • 11-2. Information display setting
  • 11-3. Illumination color selection
  • 11-4. Adjusting the Illumination color
  • 11-5. Selecting a text display
  • 11-6. Display & Illumination setting
• 12. General settings
  • 12-1. Adjusting the clock
  • 12-2. Adjusting the date
  • 12-3. Clock & date display type setting
  • 12-4. Auxiliary input display setting
  • 12-5. Muting the audio upon reception of a phone call
  • 12-6. Demonstration mode setting
  • 12-7. Initial settings
• 13. Registering a Bluetooth (KDC-BT73DAB, KDC-BT53U)
  • 13-1. About the Bluetooth module
  • 13-2. Registering a Bluetooth device
  • 13-3. Selecting the Bluetooth device you wish to connect
  • 13-4. Deleting a registered Bluetooth device
  • 13-5. Bluetooth device registration test
• 14. Hands-free phoning (KDC-BT73DAB, KDC-BT53U)
  • 14-1. Receiving a call
  • 14-2. Calling a number in the phone book
  • 14-3. Dialing a number
  • 14-4. Calling a number in the call log
  • 14-5. Speed dialing (Preset dial)
  • 14-6. Registering in the preset dial number list
  • 14-7. During a call
  • 14-8. Clearing the disconnection message
  • 14-9. Voice Control
  • 14-10. Display of phone number types (categories)
• 15. Bluetooth audio (KDC-BT73DAB, KDC-BT53U )
  • 15-1. Before use
  • 15-2. Basic operations
  • 15-3. Playback mode
• 16. Bluetooth settings (KDC-BT73DAB, KDC-BT53U)
  • 16-1. Registering the PIN code
  • 16-2. Downloading the phone book
  • 16-3. Deleting the phone book
  • 16-4. Displaying the firmware version
  • 16-5. Switching between two connected cell-phones
  • 16-6. Bluetooth detail setting
• 17. Troubleshooting guide
  • 17-1. Setting error
  • 17-2. Operation/wiring error
  • 17-3. Error messages