KDC-BT73DAB/KDC-BT53U/KDC-5057SD>10. Listen to the Digital Radio (KDC-BT73DAB)>10-10. Digital Radio initial settings

10-10. Digital Radio initial settings

You can configure initial settings of Digital Radio.

  1. Press [SRC] to select a Standby ("STANDBY").

    Refer to <Source selection>.

  2. Press [Control] knob.

    Enters the Function setting mode.

  3. Select "Initial Settings" using [Control] knob.

    For how to use [Control] knob, refer to <3-3. How to select the item>.

  4. Select a Digital Radio initial setting item using [Control] knob.

    Display

    Description

    "DAB L-Band"

    Allows switching to L band when set to "ON".

    "ON" / "OFF"

    "DAB Antenna Power"

    Sets power supply to the Digital Radio antenna. Set to "ON" when the Digital Radio antenna in use is equipped with a booster.

    "ON" / "OFF"

    (Colored text: Factory setting)

  5. Select a setting using [Control] knob.

    Returns to the previous item.

Exiting from the Function setting mode

Press and hold [1/6].

Contents