10-2. Service preset memory
You can store a ensemble, service, and component in the memory.
- Press [E] or [F] to select the ensemble, service, and component.
- Press [1/6] twice.
Enter the Preset memory mode.
- Turn [Control] knob to select a memory number ("1" – "18").
- Press and hold [Control] knob.
Exiting from the Preset memory mode
Press and hold [1/6].
About the Mix Station preset mode
- If you press [1/6] three times in step 2, the Mix Station preset mode is selected with "Mixed Preset List" displayed.
In this mode, different bands and tuner sources (FM, AM, Digital Radio etc.) can be saved in the same preset layer, which allows you to recall a desired station without switching between bands and/or tuner sources. Maximum of 6 stations can be preset in the Mix Station preset mode.
Once the Mix Station preset mode is set, you can enter the same mode by just pressing [1/6] once in step 2.
Pressing [1/6] twice allows you to return to the normal Station preset mode.
