KDC-BT73DAB/KDC-BT53U/KDC-5057SD

9-5. Tuner setting

You can set up the tuner.

1. Press [SRC] to select a Tuner ("TUNER") source.

   Refer to <Source selection>.

2. Press [Control] knob.

   Enters the Function setting mode.

3. Select "Settings" using [Control] knob.

   For how to use [Control] knob, refer to <3-3. How to select the item>.

4. Select a Tuner setting item using [Control] knob.

   Display	Description
   "Local Seek"	Only stations whose reception is good are searched in auto seek tuning. (FM only) "ON" / "OFF"
   "Seek Mode"	Sets the seek mode. "Auto1": Automatic search for a station. "Auto2": Search in order of the stations in the preset memory. "Manual": Normal manual tuning.
   "MONO"	You can reduce the noise when stereo broadcasts are received as monaural. "ON" / "OFF"
   "TI"	Switches to the traffic information automatically when the traffic bulletin starts. "ON" / "OFF"
   "News Interrupt"	Automatically receives news bulletin when it starts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing "00MIN" to "90MIN" turns this function ON. If news bulletin starts when this function is ON, "NEWS" appears and news is received. If "20MIN" is has been set, reception of another news bulletin will not start for 20 minutes. The news bulletin volume is the same level that was set for Traffic Information. "OFF" / "00MIN" – "90MIN"
   "AF"	When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same Radio data system network with better reception. "ON" / "OFF"
   "Regional"	Sets whether to switch to the station only in the specific region using the "AF" control. "ON" / "OFF"
   "Auto TP Seek"	When traffic information station reception is poor, automatically searches for a station that can be received better. "ON" / "OFF"

   (Colored text: Factory setting)

5. Select a setting using [Control] knob.

   Returns to the previous item.

Exiting from the Function setting mode

Press and hold [1/6].

Contents

• 1. Before use
  • 1-1. Safety precaution
  • 1-2. Important information
  • 1-3. Regulatory Compliance
• 2. Appendix
  • 2-1. Specifications
  • 2-2. Trademarks
• 3. Basic operations
  • 3-1. Component names
  • 3-2. Preparations
  • 3-3. How to select the item
  • 3-4. General operations
• 4. Audio adjustments (KDC-5057SD)
  • 4-1. Audio control
  • 4-2. Audio preset
  • 4-3. Audio preset recall
• 5. DSP settings (KDC-BT73DAB, KDC-BT53U)
  • 5-1. Audio control
  • 5-2. Manual equalizer control
  • 5-3. Car type selection
  • 5-4. Speaker setting
  • 5-5. X’Over setting
  • 5-6. Listening position setting
  • 5-7. Delay time control
  • 5-8. Channel level fine adjustments
  • 5-9. Resetting of DTA Settings
  • 5-10. DSP preset
  • 5-11. DSP preset recall
• 6. Listen to the iPod
  • 6-1. Models of iPods/iPhones that can be connected to this unit
  • 6-2. Playing music
  • 6-3. Music search
  • 6-4. Alphabet search
  • 6-5. Direct search
  • 6-6. Skip search
  • 6-7. Skip search ratio setting
  • 6-8. Playback mode
  • 6-9. App & iPod mode setting
• 7. Aha Radio (KDC-BT73DAB, KDC-BT53U)
  • 7-1. Requirements Aha™
  • 7-2. Listening to the Aha Radio
  • 7-3. Basic operations
  • 7-4. Station search
  • 7-5. Calling a number in the content
  • 7-6. Aha source control
• 8. Listen to the CD/ Audio file
  • 8-1. Playing music
  • 8-2. Music search
  • 8-3. Skip search
  • 8-4. Skip search ratio setting
  • 8-5. Playback mode
  • 8-6. About the Audio file
  • 8-7. About the USB device
  • 8-8. About SD card
  • 8-9. About "KENWOOD Music Editor Light" and "KENWOOD Music Control"
  • 8-10. About the discs used with this unit
  • 8-11. Handling discs
• 9. Listen to the tuner
  • 9-1. Listening to the radio
  • 9-2. Station preset memory
  • 9-3. Auto memory
  • 9-4. Recall preset station
  • 9-5. Tuner setting
  • 9-6. PTY (Program Type)
• 10. Listen to the Digital Radio (KDC-BT73DAB)
  • 10-1. Listening to the Digital Radio
  • 10-2. Service preset memory
  • 10-3. Recall preset service
  • 10-4. Service list select
  • 10-5. Alphabet Search for service
  • 10-6. PTY (Program Type)
  • 10-7. Announcement setup
  • 10-8. Replay
  • 10-9. Digital Radio setting
  • 10-10. Digital Radio initial settings
• 11. Display settings
  • 11-1. Selecting a display type
  • 11-2. Information display setting
  • 11-3. Illumination color selection
  • 11-4. Adjusting the Illumination color
  • 11-5. Selecting a text display
  • 11-6. Display & Illumination setting
• 12. General settings
  • 12-1. Adjusting the clock
  • 12-2. Adjusting the date
  • 12-3. Clock & date display type setting
  • 12-4. Auxiliary input display setting
  • 12-5. Muting the audio upon reception of a phone call
  • 12-6. Demonstration mode setting
  • 12-7. Initial settings
• 13. Registering a Bluetooth (KDC-BT73DAB, KDC-BT53U)
  • 13-1. About the Bluetooth module
  • 13-2. Registering a Bluetooth device
  • 13-3. Selecting the Bluetooth device you wish to connect
  • 13-4. Deleting a registered Bluetooth device
  • 13-5. Bluetooth device registration test
• 14. Hands-free phoning (KDC-BT73DAB, KDC-BT53U)
  • 14-1. Receiving a call
  • 14-2. Calling a number in the phone book
  • 14-3. Dialing a number
  • 14-4. Calling a number in the call log
  • 14-5. Speed dialing (Preset dial)
  • 14-6. Registering in the preset dial number list
  • 14-7. During a call
  • 14-8. Clearing the disconnection message
  • 14-9. Voice Control
  • 14-10. Display of phone number types (categories)
• 15. Bluetooth audio (KDC-BT73DAB, KDC-BT53U )
  • 15-1. Before use
  • 15-2. Basic operations
  • 15-3. Playback mode
• 16. Bluetooth settings (KDC-BT73DAB, KDC-BT53U)
  • 16-1. Registering the PIN code
  • 16-2. Downloading the phone book
  • 16-3. Deleting the phone book
  • 16-4. Displaying the firmware version
  • 16-5. Switching between two connected cell-phones
  • 16-6. Bluetooth detail setting
• 17. Troubleshooting guide
  • 17-1. Setting error
  • 17-2. Operation/wiring error
  • 17-3. Error messages