KDC-BT73DAB/KDC-BT53U/KDC-5057SD>5. DSP settings (KDC-BT73DAB, KDC-BT53U)>5-4. Speaker setting

5-4. Speaker setting

The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items.

  1. Press [SRC] to select a source other than Standby ("STANDBY").

    Refer to <Source selection>.

  2. Press [Control] knob.

    Enters the Function setting mode.

  3. Select "Audio Control" > "Pro Setup" > "Speaker Setting" using [Control] knob.

    For how to use [Control] knob, refer to <3-3. How to select the item>.

  4. Select a speaker type using [Control] knob.

    Speaker type

    Setting item

    Setting value

    "Front"

    Front speaker location

    "Door", "On Dash", "Under Dash"

    "SIZE"

    Front speaker size

    "O.E.M.", "8cm", "10cm", "12cm", "13cm", "16cm", "17cm", "18cm", "4x6", "5x7", "6x8", "6x9", "7x10"

    "TW"

    Tweeter size

    "None", "Small", "Medium", "Large"

    "Rear"

    Rear speaker location

    "Door", "Rear Deck"

    ("2nd Row", "3rd Row"[1])

    "SIZE"

    Rear speaker size

    "None", "O.E.M.", "8cm", "10cm", "12cm", "13cm", "16cm", "17cm", "18cm", "4x6", "5x7", "6x8", "6x9", "7x10"

    "SubWoofer"

    "SIZE"

    Speaker Size Subwoofer

    "None", "16cm", "20cm", "25cm", "30cm", "38cm Over"

    (Colored text: Factory setting)

    [1] Value set when "Minivan" or "Passenger Van" is selected as described in <5-3. Car type selection>.

  5. Select a setting item using [Control] knob.
  6. Select a setting value using [Control] knob.

Exiting from the Function setting mode

Press and hold [1/6].

Contents