KDC-U7056DAB/U7056BT/U7056BTL

12-5. Initial settings

You can configure initial settings of this unit.

1. Press [SRC] to select a Standby ("STANDBY").

   Refer to <Source selection>.

2. Press [Control] knob.

   Enters the Function setting mode.

3. Select "Initial Settings" using [Control] knob.

   For how to use [Control] knob, refer to <3-3. How to select the item>.

4. Select an Initial setting item using [Control] knob.

   Display	Description
   "SRC Select"	Set source selection method. "1": The source switches each time [SRC] is pressed. "2": Press [SRC], Turn [Control] knob to select the source, and then press [Control] knob to determine it.
   "Key Beep"[4]	Setting the operation check sound (beep sound) ON/OFF. "ON" / "OFF"
   "TDF Alarm"[4]	If you turn off the engine key of the vehicle without removing the panel, a beep sounds for 30 seconds. "ON" / "OFF"
   "Chinese"[1]	When this is set to ON, the following character strings are displayed in Chinese: Folder name/ File name/ Song title/ Artist name/ Album name "ON" / "OFF"
   "TAG Language"[2]	When this is set to "Arabic", "Persian", or "Thai", the following character strings are displayed in Arabic, Persian, or Thai: Folder name/ File name/ Song title/ Artist name/ Album name English / Arabic / Persian / Thai
   "Function Language" [2]	Changes the display language of items displayed in the Function setting mode. English / Arabic / Persian
   "Pandora Source"[1][3]	Sets whether to display Pandora during source selection. "ON" / "OFF"
   "aha Source"	Sets whether to display aha during source selection. "ON" / "OFF"
   "Built-in AUX"	Sets whether to display AUX during source selection. "ON" / "OFF"
   "CD Read"	Sets the method for reading CD. When unable to play a special format CD, set this setting to "2" to force playing. Note that some music CDs may be unplayable even when set to "2". In addition, audio files cannot be played when set to "2". Normally, keep this set to "1". 1: Automatically distinguishes between the audio file disc and music CD when playing a disc. 2: Forces playing as a music CD.
   "Built-in AMP"	Selecting "OFF" turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. "ON" / "OFF"
   "F/W Update"	Upgrades the firmware. Selecting "YES" and then pressing [Control] knob starts upgrading the firmware. For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/

   (Colored text: Factory setting)

   [1] Function of KDC-U7056BT.

   [2] Function of KDC-U7056BTL.

   [3] Function of KDC-U7056DAB.

   [4] Not displayed while using 3 way system.

5. Select a setting using [Control] knob.

   Returns to the previous item.

Exiting from the Function setting mode

Press and hold [1/6].

Contents

• 1. Before use
  • 1-1. Safety precaution
  • 1-2. Important information
  • 1-3. Regulatory Compliance
• 2. Appendix
  • 2-1. Trademarks
• 3. Basic operations
  • 3-1. Component names
  • 3-2. Preparations
  • 3-3. How to select the item
  • 3-4. Adjusting the clock
  • 3-5. General operations
• 4. DSP settings
  • 4-1. Audio control
  • 4-2. Manual equalizer control
  • 4-3. Car type selection
  • 4-4. Speaker setting
  • 4-5. X'Over setting
  • 4-6. Listening position setting
  • 4-7. Delay time control
  • 4-8. Channel level fine adjustments
  • 4-9. Resetting of DTA Settings
  • 4-10. DSP preset
  • 4-11. DSP preset recall
• 5. Listen to the iPod
  • 5-1. Models of iPods/iPhones that can be connected to this unit
  • 5-2. Playing music
  • 5-3. Music search
  • 5-4. Alphabet search
  • 5-5. Direct search
  • 5-6. Skip search
  • 5-7. Skip search ratio setting
  • 5-8. Playback mode
  • 5-9. App & iPod mode setting
• 6. Pandora® (KDC-U7056DAB/ KDC-U7056BT)
  • 6-1. Requirements Pandora®
  • 6-2. Listening to the Pandora®
  • 6-3. Basic operation
  • 6-4. Station search
  • 6-5. Bookmark registration
  • 6-6. New Station Creation
  • 6-7. Deletion of station
  • 6-8. Pandora source control
• 7. Aha Radio
  • 7-1. Requirements Aha™
  • 7-2. Listening to the Aha Radio
  • 7-3. Basic operations
  • 7-4. Station search
  • 7-5. Calling a number in the content
  • 7-6. Aha source control
• 8. Listen to the CD/ Audio file
  • 8-1. Playing music
  • 8-2. Music search
  • 8-3. Skip search
  • 8-4. Skip search ratio setting
  • 8-5. Playback mode
  • 8-6. Direct music search
  • 8-7. About the Audio file
  • 8-8. About the USB device
  • 8-9. About "KENWOOD Music Editor Light" and "KENWOOD Music Control"
  • 8-10. About the discs used with this unit
  • 8-11. Handling discs
• 9. Listen to the tuner
  • 9-1. Listening to the radio
  • 9-2. Station preset memory
  • 9-3. Auto memory
  • 9-4. Recall preset station
  • 9-5. Tuner setting
  • 9-6. Direct access tuning
  • 9-7. PTY (Program Type)
  • 9-8. Frequency step setting
• 10. Listen to the Digital Radio (KDC-U7056DAB)
  • 10-1. Listening to the Digital Radio
  • 10-2. Service preset memory
  • 10-3. Recall preset service
  • 10-4. Service list select
  • 10-5. Alphabet Search for service
  • 10-6. PTY (Program Type)
  • 10-7. Announcement setup
  • 10-8. Replay
  • 10-9. Digital Radio setting
  • 10-10. Digital Radio initial settings
• 11. Display settings
  • 11-1. Selecting a display type
  • 11-2. Information display setting
  • 11-3. Illumination color selection
  • 11-4. Adjusting the Illumination color
  • 11-5. Selecting a text display
  • 11-6. Display & Illumination setting
• 12. General settings
  • 12-1. Adjusting the date
  • 12-2. Clock & date display type setting
  • 12-3. Auxiliary input display setting
  • 12-4. Demonstration mode setting
  • 12-5. Initial settings
• 13. Registering a Bluetooth
  • 13-1. About the Bluetooth module
  • 13-2. Registering a Bluetooth device
  • 13-3. Selecting the Bluetooth device you wish to connect
  • 13-4. Deleting a registered Bluetooth device
  • 13-5. Bluetooth device registration test
• 14. Hands-free phoning
  • 14-1. Receiving a call
  • 14-2. Calling a number in the phone book
  • 14-3. Dialing a number
  • 14-4. Calling a number in the call log
  • 14-5. Speed dialing (Preset dial)
  • 14-6. Registering in the preset dial number list
  • 14-7. During a call
  • 14-8. Clearing the disconnection message
  • 14-9. Voice Control
  • 14-10. Display of phone number types (categories)
• 15. Bluetooth audio
  • 15-1. Before use
  • 15-2. Basic operations
  • 15-3. Playback mode
• 16. Bluetooth settings
  • 16-1. Registering the PIN code
  • 16-2. Downloading the phone book
  • 16-3. Deleting the phone book
  • 16-4. Displaying the firmware version
  • 16-5. Switching between two connected cell-phones
  • 16-6. Bluetooth detail setting
• 17. Basic operation of remote control
  • 17-1. Before using remote control
  • 17-2. Basic opreation
• 18. Troubleshooting guide
  • 18-1. Setting error
  • 18-2. Operation/wiring error
  • 18-3. Error messages