Learning function of steering remote

This function is available only when your vehicle is equipped with the electrical steering remote controller.

If your steering remote controller is not compliant, learning may not be completed and error message may appear.

  1. Touch [Steering Remote Controller] in the User Interface setting menu.
  2. Steering Remote Controller Setting screen appears.
  3. Press and hold the steering remote controller button.

  4. NOTE

    1. You can have the unit learned all buttons at a time. In that case, press all buttons one at a time and after pressing all of them, touch [Learning completed] in Steering Remote Controller Setting screen. However, new functions cannot be learned after this operation.
  5. Touch the function you want to set.
  7. Repeat steps 2 and 3 as necessary.
  9. Touch [Learning completed].

NOTE

  1. When changing the function already learned, press and hold the button you want to change in step 2 and then touch to select the changed function from the function list.
  2. Confirm the contents of the settable function on the function list. You cannot edit the function list.
  3. To initialize the contents, touch [Learning initialisationLearning initialisation] of [Steering Remote Controller] in User Interface setting menu. After you touch [Initialise], a confirmation message appears. Follow the message and complete the operation.