User Interface Setup

You can setup user interface parameters.

  1. DMX9724XDS
    Press the HOME button.
    DAX8000XDS
    Touch at the top of the screen.
    Touch HOME on the popup menu.
  2. HOME screen appears.
  3. Touch .
  4. Touch [SETUP].
  5. SETUP Menu screen appears.
  6. Touch [User Interface].
  7. User Interface setting menu appears.
  8. Set each parameter as follows.

[Source Setup - Remote Control]

Select the sources to be switched with the remote controller. For how to operate the remote controller, see Remote control. Remote control (accessory)

[Steering Remote Controller]

Sets the desired function in the steering remote controller. See Learning function of steering remote.

[Beep] *1

Turn the key touch tone on or off.

Default is “ON”.

[Photo Frame Scroll]

Set the Photo Frame Scroll feature.

“ON“/“OFF“ (default)

[MENU Button Display] (DAX8000XDS only)

This sets whether or not the button is displayed.

When this is set to OFF, operations are carried out with the included remote control.

“ON” (Default)/“OFF”

[Parking Assist Display] *2

When the iDatalink Maestro (commercially available) is connected, you can display information about obstacles around the car.

  1. [ON]: Always displays information.
  2. [Dyn.] (Default): Displays information when the sensor detects obstacles.
  3. [OFF]: Cancels this function.

[Parking Assist Position] *2

Select where to display information about obstacles on the screen (left or right).

“Left”/“Right” (Default)

[Android Auto Screen Size Switching]

Turn the Android Auto Split selection feature on or off.

“ON“/“OFF“ (Default)

[Driving Position]

Select the driving position (left or right).

“Left”/“Right” (Default)

 

  1. To use the function, it is necessary to set [Fibre Optic Output] to [OFF], and to set [X'over Network] to [2way].
  2. This can be set when the iDatalink Maestro (commercially available) is connected.