Some types of Android devices allow you to select a USB connection mode.
Set the USB connection mode to MSC (Mass Storage Class).
If you set it to MTP (Media Transfer Protocol), your Android device cannot be connected to the car audio system.
For the setting method, refer to the instruction manual that comes with your Android device.
Start KENWOOD Music Control application.
Tap on [ ] to display the Slide menu.
Select [Preference ] [Auto output] or [Output right now] of "Analyzed data output settings" to output the song information. →Settings
If pop-up message "Connect Android device to Windows PC and execute KMCHELPER.exe." appears when information for car audio/navigation system is output, go through the following steps: →KMC Helper application
Connect your Android device to the car audio system using a USB cable.
The car audio system recognizes it as KENWOOD Music Control/ KENWOOD Music Editor Media.
For how to use KENWOOD Music Control/ KENWOOD Music Editor Media, refer to the instruction manual that comes with the connected device.