Equalizer Control

You can adjust equalizer by selecting the optimized setting for each category.

  1. Press the / button.
  2. Press the / [ATT] button.
  3. Touch [DSP].
  4. Audio screen appears.
  5. Touch [EQ / SW Level].
  6. Touch the screen and set the Graphic Equalizer as desired.

Gain level (area in dotted frame)

Adjust the gain level by touching each frequency bar. You can select a frequency bar and adjust its level by R, S.

[ALL SRC]

Apply the adjusted equalizer curve to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen.

[Memory]

Saves the adjusted equalizer curve as “User”.

[Initialize]

Initialize (flatten) the current EQ curve.

[Bass EXT] (Bass Extend Settings)

When turned on, the frequencies lower than 62.5 Hz is set to the same gain level (62.5 Hz).

[SW Level]

Adjust the subwoofer volume. This setting is not available when Subwoofer is set to “None”. See Speaker / X’over setup

[Flat]/[Pops]/[Easy]/[Top40]/[Jazz]/[Powerful]/[Rock]/[User]

Recall the preset EQ curve.