Connecting the system and external components

①

Accessory ⑤ : GPS Antenna

Use the supplied GPS antenna. Using the GPS antenna other than the supplied one may cause a drop in positioning accuracy.

②

Visual Output (Yellow)

• Images can be output only from the USB (video file) source.

③

HDMI input (Type-D)

Connect a KCA-HD200 (optional accessory) to HDMI input terminal.

④

Accessory ⑦ : Steering remote harness Connect to vehicle’s steering remote harness.

Contact your KENWOOD dealer for details.

⑤

Digital Radio antenna CX-DAB1 (optional accessory)

! CAUTION

Use of a CX-DAB1 (optional accessory) as a Digital Radio antenna is recommended.

When using a commercially available Digital Radio antenna, the diameter of the SMB connector must be Φ6.5 mm or less.

⑥

FM/AM antenna input

⑦

This jack accepts either AV-IN or front view camera input. For more information, see Input Setup.

3.5 mm 4 pole mini plug (1; Left audio, 2; Video, 3; Ground, 4; Right audio)

⑧

When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.

⑨

Accessory ② : Microphone

⑩

Rear view camera input (Yellow)