Equalizer Control

You can adjust equalizer by selecting the optimized setting for each category.

  1. DMX9724XDS
    Press the HOME button.
    DAX8000XDS
    Touch at the top of the screen.
    Touch HOME on the popup menu.
  2. HOME screen appears.
  3. Touch .
  4. Touch [Audio].
  5. Audio screen appears.
  6. Touch [EQ / SW Level].
  7. Touch the screen and set the Graphic Equalizer as desired.

Gain level (area in dotted frame)

Adjust the gain level by touching each frequency bar.

You can select a frequency bar and adjust its level by [R], [S].

[ALL SRC]

Apply the adjusted equalizer curve to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen.

[Memory]

Saves the adjusted equalizer curve as “User1” to “User4”. Save the EQ curve

[Initialise]

Initialize (flatten) the current EQ curve.

[Preset Select]

Display the screen for selecting the preset equalizer curve. Recall the EQ curve

[Bass EXT] (Bass Extend Settings)

When turned on, the frequencies lower than 62.5 Hz is set to the same gain level (62.5 Hz).

[SW Level]

Adjust the subwoofer volume. This setting is not available when Subwoofer is set to “None”. See Speaker / X’over setup.