User Interface Setup

You can setup user interface parameters.

  1. Press the HOME button.
  2. HOME screen appears.
  3. Touch .
  4. Touch [SETUP].
  5. SETUP Menu screen appears.
  6. Touch [User Interface].
  7. User Interface setting menu appears.
  8. Set each parameter as follows.

[Source Setup - Remote Control]

Select the sources to be switched with the remote controller. For how to operate the remote controller, see Remote control. Remote control (accessory)

[Steering Remote Controller]

Sets the desired function in the steering remote controller. See Learning function of steering remote.

[Beep] *1

Turn the key touch tone on or off.

Default is “ON”.

[Photo Frame Scroll]

Set the Photo Frame Scroll feature.

“ON“/“OFF“ (default)

[Android Auto Screen Size Switching]

Turn the Android Auto Split selection feature on or off.

“ON“/“OFF“ (Default)

[Driving Position]

Select the driving position (left or right).

“Left”/“Right” (Default)

 

  1. To use the function, it is necessary to set [Fibre Optic Output] to [OFF], and to set [X'over Network] to [2way].