Digital Radio SETUP

You can set Digital Radio related parameters.

  1. Touch on the right side of the screen. Touch [SETUP].
  3. Digital Radio SETUP screen appears.
  4. Set each function as follows.

[Priority]

If the same service is provided by Digital Radio during Radio Data System reception, automatically switches to Digital Radio. If the same service is provided by Radio Data System when reception of the service being provided by Digital Radio becomes poor, automatically switches to Radio Data System.

[PTY Watch]

If the service of the set program type begins with the ensemble being received, switches from any source to Digital Radio for service reception.

[Announcement Select]

Switches to the set Announcement service. For details, see Announcement setup.

[Antenna Power]

Sets power supply to the Digital Radio antenna. Set to “ON” when the Digital Radio antenna in use is equipped with a booster.

Default is “ON”.

[Related Service]

When you select ON, the unit switches to a related service (if exists) when a Digital Radio service network is not available.

Default is "OFF".

[Language Select]

Selects a display language for the PTY function.